LevelOne FSW-0513Z - Manual (Page 5)

5
5. LED Indicators
On the front panel of FSW-0513, there are 10 LED indicators as the following;
POWER : “ Green On ” indicates power is on and normal.
UPLINK :
“
Green On
” indicates Ethernet Uplink port is in connection.
“
Fast Flashing
” indicates Ethernet Uplink data activities at 100M.
“ Slow Flashing ” indicates Ethernet Uplink data activities at 10M.
LINK :
“
Green On
” indicates each Ethernet LAN port is in connection.
“ Fast Flashing ” indicates each Ethernet LAN data activities at 100M.
“ Slow Flashing ” indicates each Ethernet LAN data activities at 10M.
PoE :
“
Green On
” indicates Power over Ethernet function is enabled.
“OFF” indicates the PoE is disabled, and it becomes a regular LAN port.
6. Dip Switch Settings vs Power over Ethernet
Note that the dip switches can be switched ON and OFF anytime. However, it is
suggested that the dip switches be set ready before the PoE port is connected for
power management.
1 port ON 2 ports ON 3 ports ON 4 ports ON
PoE Output Power 52Watts 52Watts 40watts 30Watts