LevelOne GES-0852 - Manual (Page 27)

27
Restart
Restart:
To restart the system, click the “Yes” button. The system will restart and show the
authentication window. Please fill in the username and password to continue.
Factory Default
Restore Factory Default:
To restore the factory default value, click the “Yes” button.
Note: The IP address of the device will also be configured as factory-default setting,
which is 192.168.1.1.
Smart Boot
This Smart Boot page allows users to select the booting flash of the device.
”Active image number” shows the current flash for booting the device. To change the
booting flash, click on your demanding flash in the “Boot image number” row and click the
“Apply” button to execute.