LevelOne GSW-2457 - Manual (Page 8)

4
Chapter 2. Installation
2.1 Mounting the Switch on a Desk
Before place the Switch on a desk, attach four rubber footpads to the flutes on
the Switch bottom, then lay the Switch on the desktop, where can be have as
much as 5kg placed on top.
Note:
1. The electrical outlet shall be installed near the device and shall be easily
accessible.
2. Make sure there is free space for radiating heat and air.
3. Make sure not to place anything too heavy on top of the switch.
2.2 Mounting the Switch in a Rack
The dimension of GSW-1657/GSW-2457 is designed according to the
standard 19 rack-mountable steel case of Electronic Industries Association.
Turn off all the equipment connected to the Switch before mounting it in the
rack, then rivet the two "L" brackets onto each side of the Switch, fasten it with
screws in the rack.
Figure 2-1 Rivet the “L” brackets onto the Switch