LevelOne IES-0810 - Manual (Page 9)

IES-0810 User Manual Page 9
Connecting to Power
Redundant DC Terminal Block Power Inputs or 12VDC DC Jack (Optional):
Redundant DC Terminal Block Power Inputs
There are two pairs of power inputs can be used to power up this device. You only need to
have one power input connected to run the switch.
Step 1: Connect the DC power cord to the plug-able terminal block on the switch, and
then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the switch.
12VDC DC Jack (Optional)
Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of
the switch.
Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a
standard AC outlet with the appropriate AC voltage.