LevelOne GVS-3800 - Manual (Page 22)

16
according to remote device’s UTP port link status. This function need
enable link transparent first.
Link Loss Carry Forward:
If enable this function, when the UTP port link down, the fiber port will be
forced link down. And the fiber will be resume when UTP port link up.
This function need enable link transparent first.
Notice
：
If local MC (Media Converter) enables TS1000 and is configured as
Center Mode, when configuring Jumbo Frame and Link
Transparent functions for local MC, the remote MC will be
configured at the same time even if it is a dump MC. And the
configuration of remote side is the same as local side.
Forward CRC Error Frame:
If enable this function, the CRC error packet will be pass, otherwise, the
CRC error packets will be dropped.
Forward Pause Frame:
If this function was enabled, this MC will forward pause frame and regard
it as a normal packet.
Management Packet High Priority:
If enable this function, this MC will enable QOS. We enable four queues,
and set queue 3 as strict priority. All management packets, such as
802.3ah OAM packets will be in queue 3 to guarantee bandwidth.
Broadcast Storm Filter, Multicast Storm Filter, Unknown DA Unicast Storm
Filter:
If enable this function, when too many broadcast/multicast/unknown DA
unicast packets arrive in a period time, the packets will be dropped.