Figure 13 tcp/ip settings (router) – LevelOne WAB-5120 User Manual
Page 28
wait for a while or even reboot before they can access the new IP address. For an
immediate access to the bridge, please flush the netbios cache on the client computer by
running the
“nbtstat –r” command before using the device name of the CPE to access its
Web Management page.
In case the WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge is
unable to obtain an IP address from a valid DHCP server, it will fall back to default static IP
address.
Use Fixed IP Address: Check this option. You have to specify a static IP address, subnet mask,
default gateway and DNS server for the CPE manually. Make sure the specified IP address is
unique on your network in order to prevent IP conflict.
If the WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge is configured as Router
mode, you need to configure some additional TCP/IP parameters for accessing the Internet.
Figure 13 TCP/IP Settings (Router)
WAN Settings: Specify the Internet access method to Static IP, DHCP or PPPOE. Users must
enter WAN IP Address, Subnet Mask, Gateway settings provided by your ISPs.