LevelOne WAB-5120 - Manual (Page 21)

Pole Mounting
1. Turn the CPE over. Put the pole mounting rings through the middle hole of it. Note that you
should unlock the pole mounting ring with a screw driver before putting it through the CPE as the
following right picture shows.
Figure 7 Pole Mounting – Step 1
2. Mount the WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge steadily to the
pole by locking the pole mounting ring tightly. The mounting ring supports pole diameter 32mm
to 70mm.
Figure 8 Pole Mounting – Step 2
3. Now you have completed the hardware installation of the WAB-5120 300Mbps 5G Wireless
Outdoor PoE Access Point/Bridge.