LevelOne WAP-6101 - Manual (Page 20)

WPA-6101 300Mbps Wireless Ceiling Gigabit PoE Access Point
3.1.3.1.1 AP Only Mode
When acting as an access point, this device connects all the wireless stations to a
wired network and the WAN Port is disabled consequently.
1. Wireless Module: Enable the wireless function.
2. Wireless Operation Mode: Choose
“AP Only Mode” from the list.
3. Green AP: Enable the Green AP function to reduce the power consumption
when there is no wireless traffics.
4. AP Number: This device supports up to 8 SSIDs for you to manage your
wireless network. You can select AP1 ~ AP8 and configure each wireless
network if it is required.