LevelOne KVM-0217 - Manual (Page 12)

12
2.2 KVM Switch Module Installation
Before Installation:
1. Please check all peripherals according to the list before installation. To make sure that the whole
unit was not damaged or lost during shipping process. If you encounter any problem, please
contact with your local dealer.
2. Before installation, make sure all peripherals and computer have been turned off.
Hardware kits contents:
1. Bracket A with thumb screw x 2
2. Screw (length = 6 mm) x 4
Install modular KVM switch step:
1. Install two screws (length = 6 mm) to combine bracket A and KVM switch. (Both sides)