LevelOne WAP-6110 - Manual (Page 30)

30
Using AP (Access Point)
The Wireless Access Point supports AP (Access Point). To use
AP:
Step 1. Connect the Ethernet cable to LAN Port
Connect the supplied RJ45 Ethernet cable from
xDSL/Cable Modem’s LAN port to the 802.11n WLAN AP's
LAN Port.
Step 2. Attach the power connector
Connect the power adapter to the power inlet “POWER” of
the 802.11n WLAN AP and turn the power switch “ON/OFF
SWITCH” of your 802.11n WLAN AP on.
* Actual ANTENNA may vary depending on model