Appletalk setup – LevelOne FPS-1032 User Manual

Page 45

Advertising
background image

45

Note: Please refer to NetWare’s Print Server/Services manuals for detailed PCONSOLE

commands.

AppleTalk Setup


The print server can print jobs submitted from Macintosh workstations connected to an
Ethernet using AppleTalk protocol. The basic configuration is for the print server in an
AppleTalk environment is performed simply by opening the Chooser window and selecting a
printer that is connected to the print server.


1.

Click Setup, it appears the sub-menu.

2.

Click AppleTalk, it as shown in the following picture.

3.

Zone Name: In this option, type an AppleTalk Zone name that you want the print

server to belong to or leave it in default (This enables the print server automatically search
and link itself to the default zone that is set on the AppleTalk router, if found)
. We also
assume that at least an AppleTalk Zone exists on the network. If no any zone exists, the
print server itself displays the zone name as an asterisk (*) in the current AppleTalk
Status
of the print server in the web browser.

4.

Port Name: In this option, type a name for identification purpose or just leave it in

default (recommended).

Note: The default print server’s Chooser name is as shown as follows:

Advertising