LevelOne VOI-8001 - Manual (Page 27)

27
4.2.2.6 Routing Setup/ VoIP Call Out Setting
/VoIP Setup/Routing Setup/VoIP Call Out
This page let you define the routing rule for Call out to VoIP. (User press the
phone number through phone set dial pad, then VoIP Gateway translate the
phone number by the routing table setting here to destination IP & dial out
number then Call out via network protocol).Here can define some special
keyword like IPIVR, PSTN as destination for some special function also.
Each time when you off hook the phone connected to this VoIP Gateway, you will
hear a dial tone or prompt voice to remind you to press the phone number, after
you input the number you called, if digits of the number of you called is not
exceed the Max Digits, please remember to press the # key for ending the input,
if you do not press # key for enter, gateway will automatically call out the
number after timeout of define on OtherDigitTime.
A. Time & Digits wait for dial out
The VoIP Gateway wait user input the number digits & time parameters as
below:
Time & Digits wait for user Press.
a. MaxDigits: Define the maximum digits wait for user press for all VoIP Call
Out, if user press digits match the number defined here. It will go to