LevelOne VOI-8001 - Manual (Page 40)

4
h. To: Define the ending line number for service this area code VoIP call.
Index Area Code Strip Prefix Maximum Minimum From To LineNo Gatekeeper Alert Profile Forward Delete
1 601 1 1
54H54H 54H
Delete
2 602 2 2
55H55H 55H
Delete
3
56H56H 56H
Delete
Ex. Any VoIP Call in number with prefix 601 will ring the line 1, and Any VoIP
Call in number with prefix Call in number 602 will ring the line 2. any other
numbers will ring any available (not busy) lines.
i. Line No: Click to enable if you want to force compare with the line number
setting on LINE CONFIGURE menu ( /VoIP Setup/Line Configure/Line
Setting/ ). If the dial number after pervious STRIP & PREFIX process is
matched with the line number setting, the VoIP call will ring the dedicate
phone line that assigned with matched number.
j. RS Verify : Assign which proxy to authorize this incoming VoIP call before
call out. For example, if the dial number should be checked by server 1
setting on the server menu ( /VoIP Setup/Register Server/ ), please
input rs1 for server 1. You can input rs2 for server 2.rs for all the servers
available ( search sequence: rs1 > rs2 > rs3 > rs4). rs3_2_1 will try rs3
first, then rs2, then rs1.
Index Area Code Strip Prefix Maximum Minimum From To LineNo Gatekeeper Alert Profile Forward Delete
1 1 Rs1
57H57H 57H
Delete
2 2 Rs
58H58H 58H
Delete
3 3 rs3_2_1
59H59H 59H
Delete
The called and the caller have to register on the same rs , When the caller
dial the number ,It can obtain a authorized number from rs , and the called
has got the call after the rs confirmed that the caller had gotten
authorization , otherwise it will send busy tone.
This confirmation only can apply in through rs to make a dial , moreover
both sides have register the same rs . If the dialing-rule is IP point-to-point
mutually dials, and because has no authorization by rs , this connection will
be unable to put through.