LevelOne DVE-0500 - Manual (Page 5)

5
Installation
Step 1: Connect each duplex LC fiber cable one by
one as indicated number. The channel “1” of TX
corresponds to channel 1 of RX. The other channels
are the same connection.
Step 2: Connect the AC/DC adapter to the RX module.
Neglect AC/DC adapter to the TX module. The PC
may supply voltage source via DVI receptacle.
Step 3: Plug directly the TX module in the DVI
receptacle of PC. Do NOT use any intermediate cable
or adapter between them.
Step 4: Plug the RX directly module in the DVI
receptacle of display. Do NOT use any intermediate
cable or adapter between them.
Step 5: Power on the PC and display.