LevelOne HVE-6601T - Manual (Page 12)

Push Button Descriptions :
Button State
HVE-6601T(Host) HVE-6601R(Client)
PB PB1 PB2
Short Press NA NA Video Mode/
Graphic Mode*
Long Press (3 sec) NA OSD Shows/
(Column position)
Anti-Dither
(1/2/off)*
Long Press on Boot
(6~8 sec)
(PWR & LINK
Blinking)
Firmware Upgrade
Mode*
Firmware Upgrade
Mode*
Update EDID*
Long Press on Boot
(PWR & LINK
Blinking)
Firmware Upgrade
Mode
and
Reset to default*
Firmware Upgrade
Mode
and
Reset to default*
NA
Button Feature Descriptions
Video Mode/ Graphic
Mode User can select to change between Video Mode /
Graphic Mode using this button. The button setting will
be saved to flash, and write-in after rebooting.
Video Mode: FW will automatically trade-off between
bandwidth and video quality to ensure smooth video
playing experience.
Graphic Mode: FW will fix the trade-off to ensure best
graphic/text viewing experience.
OSD Shows/(Column
position) User can select to change Column position using this
button when after OSD shows up. Short press to
switch column position when OSD shows up, long
press and wait for OSD shows down to functions
close.
Anti-Dither (1/2/off) Anti-Dithering Mode is design to work with ATI graphic
cards that provide dithering output. Dithering output is
used to make coloring looks better than it's original
color depth. It uses visual transient to create a
half-tone effect. However, this presents great difficulty
for Video Compression to maintain low bandwidth
even if the source display seems static. Currently, we
only see Dithering Output with ATI graphic cards.
To resolve this issue, HVE-6601 provides
Anti-dithering for
1 bit, 2 bit, or off.
If the source content does not generate dithering
output, and this feature is turn on. It will create a
blocking effect because Video Engine are unable to
detect pixel changes. User can avoid this issue by
turning this feature to off.
Update EDID "Update EDID" feature is used for Multicast Mode to
select which monitor/TV EDID is used for system wide
EDID usage.