LevelOne HVE-9900 - Manual (Page 7)

6
1 2 3 4 5 6 7
HVE-9002 HDSpider ™ Cat.5 HDMI Sender with Local HDMI Output
1. Input video format indicator [lights up for HDMI signal, lights off for DVI signal]
2. DIP switch [see table below]
3. HDMI IN: Connect a HDMI source with a HDMI male-male cable here
4. Audio OUT: Plug in a local speaker here
5. HDMI OUT: Local HDMI for connecting to a HDMI display with a HDMI male-male cable
here or cascade to the HDMI IN of another HVE-9001, HVE-9002, HVE-9004, or HVE-9008.
6. HDMI Signal OUT: Link to HVE-9003 for cascading; or link to HVE-9000 or HVE-9900 to
another HDMI display with a Cat.5e/6 cable
7. +5V DC: Connect to a 5V 4A DC power supply unit
DIP Switch
DIP Switch Position
Video Audio Description
Pin-1 Pin-2
OFF [©] OFF [©]
Up to
1080p
Stereo 1
Default Mode 2 – 1080p & stereo audio output for
most HDTVs
OFF [©] ON [ª]
720p
1080i
Stereo
Safe Mode 3 – Enforce the system output at
720p/1080i video and stereo audio for basic
compatibility among HDTVs
ON [ª] OFF [©] Bypass 4 Bypass 4
EDID Learning Mode 5 – for learning EDID from the
display while playing any received HDMI audio
format
ON [ª] ON [ª] Bypass Stereo
EDID Learning & Stereo mode 5 – for learning EDID
from the display while enforcing stereo output if
any HDTV cannot play surround sound normally