LiftMaster 880LM Smart Control Panel - Manual (Page 4)

© 2011, The Chamberlain Group, Inc.
114A4004C All Rights Reserved
FOR SERVICE DIAL OUR TOLL FREE NUMBER:
1-800-528-9131
www.liftmaster.com
Warranty
ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first consumer purchaser of this product that is free
from defect in materials and/or workmanship for a period of 1 year from the date of purchase.
Program
MENU NAVIGATION
The features on the door control can be programmed through a series of menus on the screen and the navigation buttons. Refer to the descriptions below.
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifi cations of this receiver and/or transmitter are prohibited, except for
changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards for Home or offi ce use. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CLOCK SETUP: Set the time, choose 12 or
24 hour clock and show/hide clock.
TTC SETTINGS: Set the TImer-to-Close
feature off/on and set the time interval
before door closes. NOTE: DO NOT enable
TTC if operating a one-piece door. TTC is to
be used ONLY with sectional doors.
LOCK: Enable/disable lock.
PROGRAM: Add remote controls, MyQ™
devices, an extra remote button to control
your garage door opener lights, or a keyless
entry.
SCREEN
The main screen displays the time,
temperature, and current battery charge
(if applicable).
FEATURES
Press the navigation button below "MENU" to
view the Features menu.
SETTINGS
Press the navigation button below the down
arrow till you see TEMPERATURE to view the
Settings menu.
SERVICE
Press and hold the LIGHT button, then press
the second navigation button to view the
Service menu.
TEMPERATURE: Display the temperature in
Fahrenheit or Celsius and show/hide the
temperature.
LANGUAGE: Select a language.
LIGHT SETTINGS: Set duration for garage
door opener light to stay on after operation,
selectable range of 1-1/2 to 4-1/2 minutes.
Turn the Motion sensor off/on, and turn the
entry light feature off/on.
CONTRAST: Adjust the contrast of the
screen.
SOFTWARE REVISION: Displays software
version information.
CYCLE COUNT ON/OFF: Turn the
Maintenance Alert (MAS) on/off.
TRANSMITTERS: Displays the number of
remote controls,
MyQ™ devices, door
controls and keyless entries currently
programed to operate the garage door
opener.
DISPLAY ERROR: Displays any errors that
have occurred.
Navigation Buttons