Southern Folger 50HBM DEADLATCH - Manual (Page 2)

A10 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297 s Ph: 210.533.1231 s Fx: 210.533.2211
Web: www.SouthernFolger.com s Email: [email protected]
Optional Features________
Motor voltage – 24VDC
Lock bolt keepers – Select 50H-4DB
with dust box.
Dimensional Data________
Note: Dimensions are for information
and planning purposes only and should
not be used as templates.
Specifications_________
s Case – 7 and 10 gauge steel.
s Cover – 10 gauge HRS.
s Hookbolt – .5 inch steel, case
hardened and zinc plated.
s Deadlock actuator – .5 inch
square CRS, hardened and
zinc plated.
s Deadlock and operator levers –
Stainless steel.
s Springs – Stainless steel.
s Motor – Synchronous-type
gearmotor with brake.
Electrical
Characteristics________
s Motor (AC) – Synchronous-type
gearmotor with brake.
Ratings: 120VAC, 60HZ, 1.3 amps
at full load.
s Motor (DC) – Permanent magnet
gearmotor.
Ratings: 24VDC, 2.2 amps at full
load.
s Indication switch – SPDT,
UL Listed.
Deadlock Ratings: 15 amps at 125
or 250 VAC.
Auxiliary Ratings: 10 amps 125
or 250 VAC.
FOLGER ADAM ELECTRIC LOCKS Key: Prison Paracentric
Door: Sliding
Security
Level:
Maximum
50HBM DEADLATCH
MODEL NO.
OPERATION
DESCRIPTION
LATCHBACK OPERATION
SWITCHES
INTERLOCK
INDICATION
SWITCH
DEADLOCK WITH WITHOUT
50HBM-1-01 1 X X
50HBMC-1-04 2 X X
LEGEND
50HB Series Locks
LOCK COVER PLATE TRACK SIDE
56HB
KEYED
BOTH
SIDES
52HB
KEYED
TRACK
SIDE
31 H R H L 2 3
33 H R H L 34
Specify circled swing number when ordering.
This chart shows applicability of functions and features to specific 50HBM models.
For complete details, see How To Specify on the following page.