Southern Folger D9300 MAXI-MORTISE - Manual (Page 7)

FA Rev. 02-10 C35
For more information, please call 210.533.1231.
Strikes__________________
D9300 Series Locks are supplied with a
curved lip strike having a 1-1/4" lip
length for use with doors 1-3/4" to 2"
thick. Buffed stainless steel finish only.
s Strike with indication switch – For
electric monitoring.
s Strike box – Wrought steel, zinc
plated, reversible for installation with
flat or curved-lip strike.
s Special lip lengths – Strikes are
installed 3/8" above the vertical
centerline of the lock. 1-1/4" lip
length is standard. 1-1/2" lip length is
optional for doors from 2-1/8" to
2-1/4" thick.
Handing_________________
Handing of locks should be indicated
when ordering. Guidelines shown on
page C46 will assist in determining the
hand. Door must be addressed from
the key side, the cylinder side or the
secured side.
How to Order____________
Specify:
1) Trim
a. KR, Knob and rose set. (Safety
knob available “SK”, specify side).
b. LT, LeverTrak ® Guide with handle
and rose.
c. LTE, LeverTrak ® Guide with handle,
rose and escutcheon.
2) Lock Model D93__.
3) Function (see function descriptions)
D9309.
4) Handing (RH, LH, RHR, LHR)
5) Cylinder
a. With cylinder(s)
b. Less cylinders(s)
6) Door material/thickness
7) Strike lip length
918 – 1-1/4" lip(s)
914 – 1-1/2" lip(s)
8) Strike switch(es), if required
EXAMPLE:
LT-D9309 LH Less cyl. 2"HM x 918-LS
The above is a public entrance lock with
LeverTrak
® Handle Guide, left hand, for
use with customer-supplied cylinder, on
a 2" hollow metal door, equipped with
strike-mounted switch.
FOLGER ADAM MECHANICAL LOCKS Key: Mogul
Door: Swinging
Security
Level: Minimum/Medium
D9300 MAXI-MORTISE ™
918-D-S
Strike switch
918-D ANSI
Deadbolt strike
RH/LHR shown
918-DNL
Deadbolt strike
without lip
900-BOX
Dust box 918-L ANSI
Latchbolt-only
strike
RH/LHR shown
918-LD ANSI
Latchbolt/
deadbolt
strike
RH/LHR shown