Southern Folger LOCK MOUNTINGS - Manual (Page 10)

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211 Revised 3/09
200MRS MAGNETIC
SWITCH
220A DOOR
POSITION SWITCH
200MRS TB MAGNETIC SWITCH
Triple Bias Switch
220A DOOR POSITION SWITCH
APPLICATION:
The 220A switch actuates a remote
lamp indicator or an audible signaling
device the moment a swinging door is
moved from the fully-closed position.
Enclosed in a 10 gauge galvanized
steel housing, the 220A is designed
for installation on the door frame
above the top hinge. A pivoting oper-
ator that actuates the switch is
attached to the door face with special
security screws. The 220A is
designed for use on doors with 4 -1/2”
or 5” hinges. Specify hinge size and
type (220A-5, 220A-4, etc.). Provided
with security fasteners.
TECHNICAL DATA:
• SIZE: 6-5/16” x 2-1/2” x 1-7/8”
• WEIGHT: 3 lbs.
• ELECTRICAL: Switch rating
SPDT 15 amps at 125 VAC or
.5 amps at 125 VDC
200MRS MAGNETIC SWITCH
APPLICATION:
The 200MRS is used where a built-in
door indicator switch is desired. This
tamper-proof unit is mortised into the
door frame. An actuating magnet is
recessed into the door edge.
Provided with security fasteners.
TECHNICAL DATA:
• SIZE: 4-7/8” L x 1-1/4” W
• WEIGHT: 1 lb.
• ELECTRICAL: 24 volts (AC or DC)
A C C E S S O R I E S
DOOR POSITION
SWITCHES FOR
SWINGING DOORS
F10
200MRS shown
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 100