Southern Folger 10120AP PNEUMATICALLY OPERATED DEADLATCH - Manual (Page 2)

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211 Revised 3/09
10120AP PNEUMATICALLY
OPERATED DEADLATCH
STANDARD FEATURES:
• Deadlock indication switch
• Mechanical latchback
• Strike with security fasteners
• Mogul cylinder (US26D Finish)
• Plug connector
• Solenoid valve
• Fail secure
• Mounting fasteners
OPTIONAL FEATURES:
NO LATCHBACK - Latchbolt remains
retracted as long as control switch is
activated. Latchbolt extends when power
is removed. Specify “NL.”
KNOB FUNCTION - Bolt retracted by
knob on opposite side of mogul cylinder
only. Specify “K.”
MECHANICAL KEY HOLDBACK - Bolt
retracted by key, remains retracted until
manually projected with key. Specify
“MKH.” UL Listing not available with
this function.
LOCAL ELECTRIC KEYSWITCH - Day
key provides local electric operation and
may be disabled from remote control
point. Master key provides both electric
and mechanical operation. Specify “LEK.”
EMERGENCY EXIT DOOR HOLDBACK -
Deadbolt retracted by air cylinder or by
key, extended by key only (no snaplatch
feature). When bolt is extended, lock is
deadlocked. UL Listing not available with
this function. Specify “EED”
EMERGENCY EXIT RELEASE - From
remote location latchbolt can be retracted
and held retracted until released from
remote station. Requires a second
pneumatic tube to the lock and an emergency
reserve air system. UL Listing not available
with this function. Specify “EER.”
NOTE: Master keying available.
KEY CYLINDER EXTENDER - An option
in place of providing a recess in the frame
when keying on the stop side is required.
Available in 3" or 5". 3” extender can be
used on openings up to 6” jambs.
5” extender can be used on openings up
to 8” jamb. Specify “KCE,” then
extender size. Other lengths available
upon request.
PROVIDE:(See Fig.1)
1. Dimension “A”
(overall frame width)
2. Dimension “B”
(edge of frame to centerline of lockbolt)
TECHNICAL DATA:
• STANDARD FINISH:
Galvanized
• COVER: 10 gauge steel plate
• CASE: 10 gauge steel plate
• STRIKE: Stainless steel
• LATCHBOLT: Stainless steel
• DEADLOCK ACTUATOR:
Stainless steel
• MOGUL CYLINDER:
US26D
• MOGUL KEYS:
Nickel Silver
• PIN TUMBLERS:
Combination nickel silver and
stainless steel, 6 tumblers
per lock
• ELECTRICAL: 24 VDC,
1.5 watt continuous duty
• AIR REQUIREMENT:
Consumption: 1.1 cubic inches
per operation.
Supply pressure:
80-100 P.S.I. at the door.
• LOCK SIZE:
12" H x 5-7/16" W x 3-1/2" D
• LOCK WEIGHT: 19 lbs.
• LATCHBOLT SIZE:
1-1/2" H x 3/4" TK
• LATCHBOLT THROW: 1"
• UL Listed for use on three-
hour fire doors.
• UL Listed as burglary resistant
under UL 1034.
• ASTM F 1577 Certified
Impact Test-Grade 1
Door Preparation
Frame Preparation
NOTE: Drawing for illustration only. Reference template
for specific Information.
Swing Chart: Specify circled swing number when ordering.
* Indicates both mounting / access plate side.
C4
P N E U M A T I C L O C K S
JAMB MOUNTED FOR
SWINGING DOORS
Medium and maximum security.
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 40