Southern Folger 10120AE SOLENOID OPERATED ELECTRO-MECHANICAL DEADLATCH - Manual (Page 2)

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211 Revised 12/10
TECHNICAL DATA:
• STANDARD FINISH:
Galvanized
• COVER:10 gauge steel plate
• CASE: 10 gauge steel plate
• STRIKE: Stainless steel
• LATCHBOLT:
Stainless steel
• DEADLOCK ACTUATOR:
Stainless steel
• MOGUL CYLINDER:
US26D
• MOGUL KEYS:
Nickel Silver
• PIN TUMBLERS:
Combination nickel silver
and stainless steel,
6 tumblers per lock
10120AE SOLENOID OPERATED
ELECTRO-MECHANICAL DEADLATCH
STANDARD FEATURES:
• Deadlock indication switch
• Mechanical latchback
• Strike with security fasteners
• Mogul cylinder (US26D Finish)
• Plug connector
• Continuous duty solenoid
• Fail secure
• Mounting fasteners
OPTIONAL FEATURES:
NO LATCHBACK - Latchbolt remains
retracted as long as control switch is
activated. Latchbolt extends when
power is removed. Specify “NL.”
KNOB FUNCTION - Bolt retracted by
knob on opposite side of mogul
cylinder only. Specify “K.”
MECHANICAL KEY HOLDBACK - Bolt
retracted by key, remains retracted until
manually projected with key. UL Listing for
fire door not available with this function.
Specify “MKH.”
LOCAL ELECTRIC KEYSWITCH - Day
key provides local electric operation and
may be disabled from remote control
point. Master key provides both electric
and mechanical operation. Specify “LEK.”
EMERGENCY EXIT DOOR HOLDBACK -
Deadbolt retracted by solenoid or by key,
extended by key only (no snap latch fea-
ture). When bolt is extended, lock is
dead locked. UL Listing for fire door not
available with this function. Specify
“EED.”
NOTE: Master keying available.
KEY CYLINDER EXTENDER - An option
in place of providing a recess in the frame
when keying on the stop side is required.
Available in 3" or 5". 3” extender can be
used on openings up to 6” jamb.
5” extender can be used on openings up
to 8” jamb. Specify “KCE,” then
extender size. Other lengths available
upon request.
PROVIDE:(See Fig.1)
1. Dimension “A”
(overall frame width)
2. Dimension “B”
(edge of frame to centerline of lockbolt)
• ELECTRICAL: 115 VAC,
1 phase, 60 Hz., 10 amp
inrush, 0.6 amp seated
• LOCK SIZE:
12" H x 5-7/16" W x 3-1/2"D
• LOCK WEIGHT: 19 lbs.
• LATCHBOLT SIZE:
1-1/2" x 3/4"
• LATCHBOLT THROW: 1"
• UL Listed for use on three-
hour fire doors.
• UL Listed as burglary
resistant.
• ASTM F 1577 Certified
Impact Test-Grade1
Door Preparation
Frame Preparation
NOTE: Drawing for illustration only. Reference template
for specific Information.
Swing Chart: Specify circled swing number when ordering.
* Indicates both mounting / access plate side.
B10
E L E C T R I C L O C K S
JAMB MOUNTED FOR
SWINGING DOORS
Medium and maximum security.
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 20