Optional features, Technical data – Southern Folger 10300MD-NL-GIC ADTEC 2104 RETROFIT MOTOR OPERATED ELECTRO-MECHANICAL DEADLATCH User Manual
Page 2
• Does not require modification to
electronic (PLC) system to control doors
• Wire harness compatible to adtec 2104
for easy connect/disconnect
Note #1: 1-11/16" O.D. x 1/8" wall cold
drawn tubes furnished by hollow metal
manufacturer.
OPTIONAL FEATURES:
LOCaL ELECTRIC KEYSWITCH -
Day key provides local electric
operation and may be disabled
from remote control point. Master
key provides both electric and
mechanical operation. Requires
dual-function enhancement to
builder's cylinder. Specify “LEK.”
BUILDER’S HaRDWaRE CYLINDERS -
Specify:
• “10300MD-NL-GIC-1” keyed one side.
• “10300MD-NL-GIC-2” keyed both sides.
KEY CYLINDER EXTENDER -
Required whenever lock is keyed
on stop side. Overall frame depth
4" minimum. Specify “KCE.”
full body rim cylinder required on stop side.
full body mortise cylinder required on
hinge side.
PROVIDE: (See fig. 1)
1. Dimension “a” (overall frame width)
2. Dimension “B” (edge of frame to centerline of lockbolt)
10300MD-NL-GIC ADTEC 2104
RETROFIT MOTOR OPERATED
ELECTRO-MECHANICAL DEADLATCH
TECHNICAL DATA:
• STaNDaRD fINISH:
US32D
• LOCK BODY:
Stainless steel
• faCE PLaTE:
Stainless steel
• LaTCHBOLT:
Stainless steel with (1) 1/4"
diameter case-hardened
steel insert pin
• DEaDLOCK aCTUaTOR:
Stainless steel
• ELECTRICaL: 24 VDC
1.5 amp maximum
• RETROfIT MOUNTING SIZE:
13-5/8" H x 1-3/4" W x 2-13/16" D
frame Preparation
NOTE: Drawing for illustration only. Reference template
for specific Information.
Swing Chart:
Specify circled swing number when ordering.
• LOCK SIZE:
10-5/8" H x 1-1/2" W x 1-3/4" D
• LOCK WEIGHT: 3.6 lbs.
• LaTCHBOLT SIZE:
1-5/8" H x 5/8" TK
• LaTCHBOLT THROW: 3/4"
• BUILDER’S CYLINDER:
U.S. Patent 5,640,865
1-5/32" diameter with
standard Yale cam or equal
• aSTM f 1577 Certified
Impact Test-Grade 1
Sideload 550 lbs
• Tested to over 1 million
operations.
E L E C T R I C L O C K S
JAMB MOUNTED FOR
SWINGING DOORS
Minimum and medium security.
1-11/16" O.D. x 1/8"
wall cold drawn tubes
are required.
See Note 1
5909 West Loop South, Suite 310, Bellaire, Texas 77401 USA
Tel 281.300.3023 • Fax 713.583.6235
OFICINA DE REPRESENTACION: Rio Nilo No. 71, Mexico, D.F. 06500
Tel 55.5511.7041 • Fax 55.5208.2859
geotexic.com • [email protected]
— continued from other side
11/1/11