Accell MPC-LNK - Manual (Page 5)

-4-
MPC-68K Series ~16-Bit CPU Controller ~
MPC-684
High-Speed CPU Board 4 Outputs, 8 Inputs
[Characteristics]
This is a high-speed CPU board equipped with two RS-232C channel. By its installed
interpreter (ADVFSC
® ), programming is possible in a BASIC-like environment. MPC-683
supports an execution speed more than twice as fast as 68K, and floating-point computation.
[Specification]
Power source: DC 12V~24V battery retained for 5 years (w/o external power supply at
room temperature).
CPU: MC68340 20M clock. 4M SRAM*2 + 4M FROM*2.
Control I/O: 8-point photocoupler input (4-point open collector output).
RS232c: 2CH
Self-consumed current: 500 mA (1A power source installed)
[Option] MC688XXFN-25 Coprocessor (for floating point calculations)
[Accessories] (1) Power connector (H4P-SHF-AA) JST *1
(2) Contacts (BHF-001T-0.8SS) JST *4
MPC-68K
Main CPU Board 4 Outputs, 8 Inputs
[Characteristics]
This is a CPU board equipped with two RS-232C channels. By its installed interpreter
(ADVFSC
® ), programming is possible in a BASIC-like environment. In spite of its
compactness, it is equipped with two 4M-bit flash ROMs, and its program area of about
10000 steps can be used by an actual machine without any procedure such as ROM conversion
or compiling. It can also be used as a pulse generator by itself. Its bus is C-bus-based, so an
I/O board for 98 can also be directly used.
[Specification]
Power source: DC 12V~24V battery retained for 5 years (w/o external power supply at
room temperature).
CPU: TMP68301F-16 16 MHz. 1M SRAM*4 + 4M FROM*2.
Control I/O: 4-point open collector output. 8-point photocoupler input.
RS232c: Photoisolated, user 2CH.
Self-consumed current: 250 mA (1A power source installed)
[Accessories] (1) Power connector (H4P-SHF-AA) JST *1
(2) Contacts (BHF-001T-0.8SS) JST *4
MPG-405
High-Speed S-Shape Acceleration/Deceleration PG Board (400K) 4-Axis Output, 8-Origin Input
[Characteristics]
This is a dedicated pulse-generation board equipped with the maximum pulse rate of 400
kpps (two-axis linear interpolation). It is an upper-compatible board that can replace MPG-
68K. Because it uses dedicated pulse generation (except GO, RM, DEFTBL, XPLS, and
WPLS), DDA computation, and counter IC, high-speed pulse generation and arc interpolation
have become possible. The arc interpolation is up to 200 Kpps. Also, because it is equipped
with an S-shape acceleration/deceleration function, vibration prevention of the device is also
effective.
[Specification]
Power source: DC 12V~24V battery retained for 5 years (w/o external power supply at room
temperature).
CPU: TMP84C015BF, KM3701, X3202, etc.
Pulse output: 4-axis/RS422 specification (photoisolated).
Consumed current: 180 mA
[Accessories] (1) Power connector (H4P-SHF-AA) JST *1
(2) Contacts (BHF-001T-0.8SS) JST *4
(3) Connector (HIF-3BA-16D-2.54R) Hirose *1
(1)
(2)
(1)
(2)
(3)
(1)
(2)
CEP-041
MPC68K
ACCEL CORP.