Block diagram(x16 2ranks) – SP / Silicon Power SP008GBSTU160N02 User Manual

Page 15

Advertising

background image

DDR3 SODIMM

Product Datasheet

Rev. 1.5a Nov. 2012

15

Block Diagram(x16 2Ranks)

Note:

The ZQ ball on each DDR3 component is connected to an external 240Ω resistor that is tied to

ground. It is used for the calibration of the component’s ODT and output driver.

Advertising

This manual is related to the following products:

SP004GBSTU160V02 SP004GBSTU160V01 SP002GBSTU160V02 SP016GBSTU160N22 SP008GBSTU160V22 SP008GBSTU133N02 SP004GBSTU133V02 SP004GBSTU133V01 SP002GBSTU133S02 SP002GBSTU133V02 SP002GBSTU133V01 SP016GBSTU133N22 SP008GBSTU133V22 SP004GBSTU133V22 SP004GBSTU106N02 SP004GBSTU106V02 SP004GBSTU106V01 SP002GBSTU106S02 SP002GBSTU106V02 SP002GBSTU106S01 SP002GBSTU106V01 SP008GLSTU160N02 SP008GLSTU160N01 SP004GLSTU160N02 SP004GLSTU160N01 SP004GLSTU160V02 SP004GLSTU160V01