Alpine IDA-X303 - Manual (Page 11)

9
-EN
Frequency Search Function
You can search for a radio station by its frequency.
1
Press /ENTER in Radio mode to activate
Frequency search mode.
2
Turn the Double Action encoder to select the
desired frequency.
3
*
Press /ENTER to receive the selected frequency.
* Operation is not required during HD Radio reception.
• Press in the search mode to cancel. Or, the search mode will be
canceled if no operation is performed for 10 seconds.
Receiving a Multicast Station (HD
Radio™ Reception) (HD Radio mode
only)
Multicasting which is the Ability to broadcast multiple program streams
over a single FM frequency thereby increasing the amount and diversity
of content choices. A maximum of eight multicast station channels can
be selected on this unit.
1
When multicast station is received, the program
number is displayed, and
indicator lights up.
2
Press FUNCTION/SETUP to display the Program
Type screen.
3
Turn the Double Action encoder to select a
program, and press
/ ENTER.
The selected program is received.
Program Service example:
Changing the Display (HD Radio mode
only)
Press VIEW.
Every time VIEW is pressed changes the display.
* You can set a long or short HD Radio station name. Refer to “HD
Radio Station Call Setting” (page 23).
Multicast Radio Station Program No. Program Service
88.7 1 MPS: Main Program Service
88.7 2 SPS: Sub-program Service
88.7 3 SPS: Sub-program Service
·
·
·
88.7 8 SPS: Sub-program Service
F M 1 - 2
8 8 . 7
Program No.
F M 1 - 3
8 8 . 7
Program No.
Band No.
Frequency Station
Station Call Letter* Song title
Artist title
Song title
Album title Calendar
Clock Band No.
Frequency