ATEN CS428 - Manual (Page 26)

CS428 User Manual
18
F3 LIST:
This function lets you broaden or narrow the scope of which ports the OSD
lists. This will be different for each Console, depending on the choices made
for that Console. The choices and their meanings are given in the table, below:
Double Click the choice you want, or move the Highlight Bar to it then press
[Enter]. An icon appears before the choice to indicate that it is the currently
selected one.
Note: 1. You can access any port on any list by Double Clicking it, or using
the Navigation Keys then pressing [Enter].
2. If you select a port that does not have a computer attached to it, or if
the attached computer is powered Off, the OSD will still switch to it,
and will not show an error. To recover, press the OSD Activation
Hotkey (see OSD Overview, page 13).
Choice Meaning
ALL Lists the Port Numbers and Names (if names have been
specified - see F2 EDIT:, page 17), of all the ports on the
installation.
QVIEW Lists only the ports that have been selected for Quick View
scanning (see F7 QV, page 24).
POWERED ON Lists only the ports that have their attached computers Powered
On.
POWERED ON +
QVIEW Lists only the ports that have been selected for Quick View
scanning (see F4 SCAN:, page 19), and that have their
attached computers Powered On.
QVIEW + NAME Lists only the ports that have been selected for Quick View
scanning (see F7 QV, page 24), and have been assigned
names (see F2 EDIT:, page 17).
NAME Lists only the ports that have been assigned names (see F2
EDIT:, page 17).
cs428_2007-05.book Page 18 Thursday, May 17, 2007 5:08 PM