Steelcraft Automotive 73020 BULL BAR - Manual (Page 2)

BULL BAR
05-12 TOYOTA TACOMA
Page 2 of 3 1/16/12 Rev2 (DP)
Driver Side Installation Pictured
Remove (2) factory
hex nuts on outside
of frame
Insert 12mm Spacer Washer
between the Mounting
Bracket and the frame
Front
Spacer Washer will
cover this opening in
the end of the frame
(Fig 4) Driver Side Bracket Pictured
Fig 3
Fig 2
Fig 1
Factory hex nuts
10mm x 120mm Hex Bolt
10mm x 30mm Large
Flat Washer
12mm Spacer
Washers
10mm x 20mm
Small Flat Washer
10mm Lock Washer
10mm Hex Nut
Front