Steelcraft Automotive 155110 RUNNING BOARD - Manual (Page 4)

VIEWPOINT RUNNING BOARDS
2009-13 HONDA PILOT
Page 4 of 5 2-13-13(DP)
Driver Side Installation Pictured
Fig 10
Driver side Center Bracket
Fig 7
(Fig 8) Driver side Center Bracket installed
8mm Hex Bolt
8mm Flat Washer
8mm Insert Tool
8mm Threaded Insert
Front
Rear
(Fig 11) Tighten Hex Bolt to collapse and
lock Threaded Insert into factory hole
Driver side Rear Bracket
Notch on Center
Bracket only Front
(Fig 6) Driver side center mounting location pictured
(Fig 9) Driver side rear mounting location pictured
Locate (2) factory
8mm threaded holes
(2) 8mm x 25mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
Locate (1) factory
8mm threaded hole
Locate (1) factory
hole in floor panel