Steelcraft Automotive 230940 3 ROUND SIDE BAR - Manual (Page 2)

3" SIDEBAR
2000-06 TOYOTA TUNDRA ACCESS CAB
Page 2 of 3 1/17/12 (DP)
8. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer
over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be
used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Driver Side Installation Pictured
(Fig 1) Mounting location for driver
side front Mounting Bracket
(Fig 2) Opening in driver side frame channel
pictured from below and behind frame channel
(Fig 3A) Inside view of Long Bolt Plate
installed in driver side frame channel
Fig 4
(Fig 3B) Use Long Bolt Plate
for driver side installation
and use Short Bolt Plate for
passenger side only
1/2" Flat Washer
1/2" Lock Washer
1/2" Hex Nut
Front
Front
Front