Steelcraft Automotive 422509 5 OVAL SIDE BAR - Manual (Page 2)

5" OVAL STRAIGHT SIDEBARS
09-11 DODGE RAM 1500 CREW CAB
10-11 RAM 2500-3500 CREW CAB
Page 2 of 3 10/1/10 (DP)
6. Properly level and adjust the Sidebar, then tighten all hardware at this time.
7. Repeat steps 2-6 for passenger Side Bar installation.
8. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Driver Side Installation Pictured
12mm x 40mm Bolt x 10mm Nut
Plate w/ 12mm Plastic Retainer
(Fig 1A) Driver/Left front mounting location
Fig 2
(Fig 1B) Driver/Left center mounting location
(Fig 1C) Driver/Left rear mounting location
Front
Rear
Front