Steelcraft Automotive 433129p 5 PREMIUM OVAL SIDE BAR - Manual (Page 2)

5IN BENT END SIDEBAR
07-12 TOYOTA TUNDRA CREW MAX
Page 2 of 2 1/21/12 (DP)
Driver Side Installation Pictured
Remove plastic
plugs (if equipped)
or hex bolts from
threaded holes
There are four sets of threaded holes in the side panel. Starting from
the front of the vehicle, use the first, second, and fourth set of holes.
(Fig 1) Driver/Left Front Mounting Location Pictured
(Fig 4) Driver/Left Center Bracket Pictured
(Fig 5) Driver/Left Rear Bracket Pictured
8mm x 30mm Hex Bolts
8mm Lock Washers
8mm Flat Washers
Complete Installation
Front
Front
Front
Front
(Fig 2) Driver/Left Front Mounting Location Pictured
(Fig 3) Driver/Left Center Mounting Location Pictured
8mm x 30mm Hex Bolts
8mm Lock Washers
8mm Flat Washers
Rear