Steelcraft Automotive 412459p 5 PREMIUM OVAL SIDE BAR - Manual (Page 2)

5IN BENT END SIDEBAR
99-12 FORD F-250/450 SUPERDUTY SUPER CAB
Page 2 of 2 1/5/12 (DP)
10. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Driver Side Installation Pictured
8mm x 30mm Hex Bolts
8mm Lock Washers
(2) 8mm Flat Washers
8mm Hex Nuts
8mm Clip Nuts
8mm x 30mm Hex Bolts
8mm Lock Washers
8mm Flat Washers
8mm x 25mm Hex Bolts
8mm Lock Washers
8mm Flat Washers
(Fig 1) Typical Mounting Location
Fig 2
Fig 3 Fig 4
Factory holes in pinch weld
Factory holes in pinch weld
Line up Clip Nut
with factory hole
Rear
Front