Sunex Tools SX280 - Manual

SX280: Parts Breakdown & Operating Manual 10/25/11
Punch Hole ..................3/16" (9.525mm)
Cutting Capacity:
Steel .................................0.05" (1.2mm)
Aluminum .........................0.08" (2.0mm)
Weight .......................... 2.9 Lbs. (1.3 kg)
Length .............................9.84" (250mm)
SX280
3/16" (5MM)
PUNCH/FlaNge
Tool
Average Air
Consumption ...... 0.25 CFM (7.08 l/min)
Air Inlet .....................................1/4" NPT
Minimum
Hose Size .....................3/8" I.D. (10mm)
SPECIFICATIONS
AVOID PROLONGED EXPOSURE TO VIBRATION
WEAR HEARING PROTECTION
ALWAYS WEAR SAFETY GOGGLES
ALWAYS READ INSTRUCTIONS BEFORE
USING POWER TOOLS
WARNING
Operating Instructions • Warning Information • Parts Break down