Asante Technologies FriendlyNET Wireless USB Adapter - Manual (Page 36)

Chapter 7. Windows Security
Since Bluetooth transmits information wirelessly, Asanté recommends turning on security when
handling sensitive and personal data communications. This chapter describes how to enable all
security settings for all Asanté Bluetooth services for Windows. The screen images shown in this
chapter reflect Windows XP. If you are using another version of Windows, your screens may be
different.
I NTRODUCTION
Each service that the server provides can be configured to require:
• Authorization: the server operator must acknowledge all connection attempts before a
connection is established.
• Authentication: the server requires a Personal Identification Number (PIN, also referred to as
a “passkey”) code or a Link Key before a connection is established.
• Encryption: all data sent between the Bluetooth client and Bluetooth server is encrypted. The
encryption key is based on the Authentication Link Key; Encryption requires that
Authentication be enabled.
The default security setting for Authorization, Authentication and Encryption is disabled. Devices can
also be paired; a process that eliminates the need to enter a PIN code every time access is
attempted.
A UTHENTICATION
Authentication is used to verify identity; it requires a passkey or Link Key from the remote device.
When a remote device attempts access, a visual and/or audio warning notifies the local operator.
The local operator can open a dialog box that provides:
• The user-friendly name of the device attempting access.
• A place for the user to enter a Bluetooth passkey.
The user of the remote system must enter the identical passkey or access is denied. If the notification
is ignored, access is denied after a preset timeout. When devices are “paired”, those devices
automatically exchange a Link Key and Authentication is carried out without operator intervention.
A UTHORIZATION
Authorization is Boolean; it’s either yes or no. A visual and/or audio warning alerts the server operator
that a remote device is attempting to connect. The server operator responds by clicking the Bluetooth
icon in the Windows system tray to open a dialog box that displays:
• The user-friendly name of the device attempting to connect.
• The local service to which the remote device is attempting to connect.
The user may grant or deny access to the service by clicking an on-screen button. If the server
operator ignores the Authorization notification access will be denied after a preset timeout.
Asanté FBT100 User’s Guide 11/12/02 Edition 36