Superwinch C1000 (Motor Cover/Remote) - 453 kgs/12V - Manual (Page 3)

2
The C1000 electric winch is for intermittent duty only. Motor cool-down time
is required. Can be mounted horizontally or vertically. Winch can be
utilized in a variety of lifting operations involving machinery, trucks, boats,
farm implements, etc. Equipped with DC motor, permanently lubricated/sealed
gear box, switch with harness assembly, handsaver, and pulley block.
For additional information, consult Specifications and Performance.
D E S C R I P T I O N
U N P A C K I N G
Electric Motor - 1.3 peak hp (0.9
kW) 12 Volt Permanent Magnet.
Gear Ratio . . . . . . . . . . . . . . . 159:1
Braking - A wrap spring brake will
support the load when power to
the motor stops.
Remote Switch - 12’ (3.66m) Hand
held pendant switch assembly with
interlocking reverse switch and trigger.
Working Load* . 1,000 lbs (454 kg)
Safety Factor . . . . . . . . . . . . . . 5:1
(*) Based on first layer performance.
S P E C I F I C A T I O N S
This equipment must be used as recommended by the
manufacturer. Failure to follow these recommendations
could endanger your life and/or cause property damage.
Please unpack carefully and read the instructions before beginning. Inspect
carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts.