System Sensor FAAST Networking User Manual
Page 35
User Guide: FAAST Fire Alarm Aspiration Sensing Technology® Networking
35
Field
Description
The e-mail address of the recipient to receive notification
Alert
E-mail generated when the device has reached the specified alarm level
Action 1
Action 2
Fire 1
Fire 2
Minor
E-mail generated when the device detects a Minor Fault
Urgent
E-mail generated when the device detects an Urgent Fault
Isolate
E-mail generated when the device has been placed into Isolate Mode
10. When the desired e-mail settings have been entered, click the Save
icon
11. The following message will appear
If all settings are correct, select Yes to send the new configuration to the detector. If you would like to make changes, select No.
Note:
To send the configuration to the detector manually, right-click on the device and select Send Configuration.
12. After receiving the configuration, the detector will shut down and restart. The detector will then begin operating using the
new e-mail settings.
Note:
The e-mail client requires 5 minutes from power-on to initialize. No e-mails will be sent during this period.