System Sensor 1151 Low Profile User Manual
Page 3
Advertising
D100-51-00 3 I56-546-08R
Figure 2:
7. Reinstall the sensor cover. Use the test module socket
and LEDs to align the cover with the sensor. Snap the
cover into place.
8. When all sensors have been cleaned, restore power to
the system and test the sensor(s) as described in the
TESTING section of this manual.
S0171-00
Special Note Regarding Smoke Detector Guards
Smoke detectors are not to be used with detector guards
unless the combination has been evaluated and found
suitable for that purpose.
Advertising