ACR Electronics PATHFINDER 2714 - Manual (Page 7)

Approved for GMDSS use
WARNING:
Contains Lithium Battery
To avoid possible fire, explosion, leakage or burn hazard, do not open,
recharge, disassemble, heat above +70°C (+158°F) or incinerate.
3.0 Vessel
name
The SART label has a space where you should mark the vessel name (see Figure 3). This
can be done as follows . . .
Using an indelible pen
With an indelible pen, you can write the vessel name directly onto the SART. Note
however, that some indelible inks will fade when exposed to strong sunlight, so a ultra-
violet resistant pen is recommended.
If the full vessel name will not fit in the space provided, use a recognized abbreviation or
the vessel's call sign instead.
Name/Vessel Registration
Nom/Enregistrement De Navire
Vessel Name Here
Figure 3
Y1-03-0170 Rev. B 7