Teka VR TC 95 4I - Manual (Page 21)

Appliance description GB
21
Operating the hob with the sensor keys
The ceramic glass hob is operated with touch control sensor
keys. The sensor keys are operated as follows: lightly touch a
symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor key will then be indicated as “key”.
ON/OFF key (7)
This key is used to switch the entire hob on and off. It is, as it
were, the main switch.
Cooking zone selection key; e.g. front left (8)
Pressing one of the cooking zone selection keys available will
select a cooking zone, for which the Plus key or the Minus key
may be used to set the cooking level.
Minus key / Plus key (10)
These keys are used to set the cooking levels, the automatic
switch-off device and the minute minder. The Minus key reduces
the setting and the Plus key raises it. The setting can be deleted
by pressing both keys simultaneously.
Power setting display (11)
The power setting display shows the power setting which has
been selected, or:
H ............... Residual heat
A................ Automatic boost function
STOP ........ Stop function
.............. Keep-warm function
A cooking zone can be switched on when the stand-by dot (12)
lights up.
Circuit activation key (13)
To activate other heating circuits.
Timer selection key (15)
For programming the automatic switch-off device (timer) and the
minute minder.
STOP key (19)
The STOP function can be used to briefly stop the cooking
process.