Teledyne LeCroy OC1024 Oscilloscope Cart - Manual (Page 9)

9
Illustration 15: Firmly tighten the 4 Short Screws and Large Lock Washers into the Bottom Tray as shown.
Illustration 16: Firmly tighten the 6 Short Screws and Large Lock Washers into the Legs as shown.
Illustration 17: Carefully stand the cart upright as it will sway somewhat. Adjust the Support Bar to be 15.5” from the Tray.
Ensure that the cart is vertical, then firmly tighten the Support Bar screws. Adjust the Middle Shelf 26” from the Tray, and firmly tighten
the Middle Shelf’s 4 Set Screws, Shoulder Screws and Knobs. Adjust the Top shelf to the top of the Posts, and firmly tighten the 4
Short Screws and the 2 Long Screws in the Legs. Install the Drawer.
15 17
16
!
!
26”
15.5”
Small Wrench
Large Wrench
10 Large Lock
Washers
10 Short
Screws