Teledyne LeCroy WM8Zi-2X80GS - Manual (Page 2)

Instructions
The other channel in the combined pair, Channel C1 or C4, is shown as "not active" on the
trace descriptor box. The External Interleave Device dialog, which appears behind the channel
dialog, shows the paired channel attributes.
© 2013 Teledyne LeCroy, Inc. All rights reserved.
Teledyne LeCroy is a trademark of Teledyne LeCroy, Inc. Other product or brand names are trademarks
or requested trademarks of their respective holders. Information in this publication supersedes all
earlier versions. Specifications are subject to change without notice.
September 2013
922275-00 RevA 2