Teledyne LeCroy USB2-GPIB - Manual (Page 3)

1
Notes
• Parts of the contents of this manual may be modified without prior notice
for improvements in performance and functions.
• Reproduction or reprinting of the contents of this manual without prior
permission from Teledyne LeCroy is prohibited.
• If you have questions about this adapter, please contact Teledyne LeCroy
at [email protected], 1-800-5-LeCroy.
Table of Contents
Overview .............................................................................................................................. 1
Safety Information.............................................................................................................. 2
Maintenance........................................................................................................................ 2
How to Use the USB2-GPIB............................................................................................. 3
(a) Connection............................................................................................................. 3
(b) Setting up the GPIB.............................................................................................. 4
(c) Communication Status....................................................................................... 5
(d) Firmware Upgrade................................................................................................ 6
Specifications...................................................................................................................... 7
Service .................................................................................................................................. 8
Warranty............................................................................................................................... 8
Certifications....................................................................................................................... 9
Overview
The USB2-GPIB Converter enables you to remotely control an oscilloscope from
a PC using standard GPIB commands.
• The GPIB connector conforms to IEEE488.2 standard. Its delimiter setting is
LF+EOI.
• The USB connector conforms to USB 2.0. For details of the GPIB commands,
see the Remote Control Manual on the Teledyne LeCroy website. Note that the
USB2-GPIB does not function as a controller.
• Minimum firmware version required for this device is 6.5.0.x.