Getting started manual – Teledyne LeCroy LogicStudio User Manual
Page 35
Getting Started Manual
B
922294 Rev A
31
oscilloscope. Aside from triggering and threshold settings, most LogicStudio
features are fully functional and behave exactly as they would for real
devices.
PLEASE NOTE THE FOLLOWING
:
It’s not necessary to disconnect from a device in order to
connect to a different one. Simply connect to the new one and
the previous one is disconnected automatically.
If a connected device is not on the list it may be an
unsupported manufacturer/model. Otherwise, use the Refresh
List option to force detection. If it still does not appear, check
the connection and device settings and try again.
If a connected device is not working properly, verify the
software version of the connected device. LogicStudio works
best with the most recent software version.