Basics 25, Vertical – Teledyne LeCroy HDO 4000 Getting Started Guide User Manual
Page 29
Advertising
923010-00 Rev A
BASICS
25
Vertical
These controls adjust the channel trace along the Y axis.
From the Front Panel
Analog Traces From the Display
Touch to activate the trace and
again to open the Channel dialog.
Touch any control to change the value.
Use the Up/Down buttons to change Vertical Scale or Offset.
Press to activate analog trace.
Turn to raise or lower Offset (analog)
or Vertical Position (digital). Push to
return to zero.
Turn to raise or lower Vertical Scale
(analog) or Group Height (digital).
Push to adjust with more precision.
Press to activate digital trace
(-MS models only).
A
B
C
A
B
C
A
B
A
B
D
D
Advertising