Teledyne LeCroy WaveSurfer Automation Command - Manual (Page 3)

A
UTOMATION
C
OMMAND
R
EFERENCE
M
ANUAL
- I
NTRODUCTION
918499 Rev A
iii
Introduction
This manual provides a comprehensive reference of all the commands available to a controlling application when using
WaveSurfer oscilloscopes. Automation enables the controlling application to run on the instrument itself.
PLEASE NOTE THE FOLLOWING:
 Available commands include ones for purchased options you may or may not have on your oscilloscope. For more
information, contact your local LeCroy sales office for more information about options available for your instrument.
 While we encourage the use of our code examples provided in our manuals, cutting and pasting code samples
directly from this .pdf manual into scripts cause syntax errors (typically illegal ASCII quotation characters). Carefully
review code sample formatting during reuse.
The information in this manual is split into Control and Processor sections, each with their own table of contents.