Teledyne LeCroy AP015 - Manual (Page 20)

ADP015 Current Probe
16 922254-00 Rev A
Appendix A: Performance Verification
Test Record
Permission is granted to photocopy this form and use it to record the results of
measurements made during the performance verification of the AP015 Current
Probe. File the completed record as required by applicable internal quality
procedures.
Each section of the test record corresponds to the parameters tested in the
performance verification procedure. The numbers preceding the individual data
records correspond to the steps in the procedure that require recording of data.
Results recorded in the right-most column, labeled “Test Result” are the actual
specification limit check. The test limits are included in all of these steps. Other
measurements and the results of intermediate calculations that support the limit
check are recorded in the center column labeled “Intermediate Data.”
Permission is granted to reproduce this page for the purpose of recording test
results.