Teledyne LeCroy CP031 - Manual (Page 20)

CP031 Current Probe
14 923362-00 Rev A
Specifications
Nominal Characteristics
Nominal characteristics describe parameters and attributes which are guaranteed by design, but do not
have associated tolerances.
Maximum Continuous Input Current 30 A
rms
(Refer to Figure 3)
Maximum Peak Current 50 A
peak
, noncontinuous
Insertion Impedance Refer to Figure 4
Intended Output Load 1 MΩ
Maximum Permitted Circuit Voltage 300 V, CAT I (Insulated conductor)
Warranted Characteristics
Warranted characteristics describe parameters which have guaranteed performance. Unless otherwise
noted, tests are provided in the Performance Verification Procedure for all warranted specifications.
Guaranteed at 23 °C ±5 °C (73 °F ±9 °F) after power has been applied for 30 minutes.
Amplitude Accuracy ±1.0% of reading ±10 mA; to 30 A
rms
±2.0% of reading; to 50 A
peak
(DC, 45 to 65 Hz)
Typical Characteristics
Typical characteristics describe parameters which do not have guaranteed performance; however are
representative of the average performance from a sample of several probes. Tests for typical
characteristics are not provided in the Performance Verification procedure.
Sensitivity* 20 mA/div* to 50 A/div.
Output voltage 0.1 V/A
Sensitivity Temperature ±2% or less. (from 0° to +40 °C,
Coefficient 32 °F to 104 °F)
Noise Equivalent to 2.5 mA
rms
or less
(BW of measuring instrument: 20 MHz)
Bandwidth DC to 100 MHz.
Rise Time ≤ 3.5 ns
* Lower sensitivity may change with different oscilloscope models.