Teledyne LeCroy PP010 - Manual (Page 6)

6 PP010-OM-E Rev A
Specifications
Electrical Characteristics
Bandwidth DC to 200 MHz ( ±3 dB)
Attenuation 10:1 ±3%
Input RC 10 M Ω ±2% // 12.5 pF ±2 pF
Compensation Range 18-35 pF
Probe Length 1.5 m
Connector Type BNC
Environmental Conditions
Temperature (operating) 5 to 40 °C
(non-operating) -20 to +70 °C
Humidity (operating) 80% RH (5 to 31 °C)
Altitude (operating) up to 2000 m (6562 ft)
Electrical Ratings
Maximum Input Voltage 600 V (DC + AC
peak
)
Note: The maximum input voltage derates when frequency response is 1 MHz
or higher. See voltage derating curve on the next page.
EC Declaration of Conformity
The PP010 probe meets intent of the European Council Directive 73/23/EEC
for product safety per the following standard:
EN 61010-031:2002 Safety requirements for hand-held
probe assemblies for electrical test
and measurement
Installation (Overvoltage)
Category I (All mains isolated
terminals)
Pollution Degree 2