11 ipegenoptions2::setskew, Parameters, Return values – Teledyne LeCroy Automation API for Teledyne LeCroy PETracer_PETrainer User Manual

Page 104: Remarks, Example, Ipegenoptions2::setskew

Advertising

Teledyne LeCroy

Automation API for PETracer/PETrainer

6.3.11 IPEGenOptions2::SetSkew

HRESULT SetSkew (

[in] int lane,
[in] int skew )

Allows skew values to be set for each lane of outgoing traffic.

Parameters

lane

Specifies the lane to set the skew value on

skew

Specifies the numeric value for the skew on the specified lane; allowed

values are from 0 to 7

Return values

Remarks

Example

WSH:

Set Analyzer = WScript.CreateObject( “CATC.PETracer” )
Set GenOptions = Analyzer.GetGenerationOptions

GenOptions.SetSkew( 0, 0 )

‘ set skew value 0 for lane 0

GenOptions.SetSkew( 1, 2 )

‘ set skew value 2 for lane 1

GenOptions.SetSkew( 2, 0 )

‘ set skew value 0 for lane 2

GenOptions.SetSkew( 3, 3 )

‘ set skew value 3 for lane 3

C++:

Advertising